Clear-Com FreeSpeak II FSII-BP19 Beltpack
Clear-Com FreeSpeak II FSII-BP19 Beltpack
FreeSpeak II Beltpack: 1.9GHz, US with (5) assignable keys, 4 pin XLR-Male or 5 pin XLR-Female & BT headset
Includes BAT60 battery
Audio Masterpiece I-Code: 100729
Mfg. Part #: FSII-BP19-X4-US or FSII-BP19-X5-US
The FSII-BP19 is a rugged, water-resistant beltpack that operates in the ISM license-free 1.9 GHz frequency range. Featuring the “Clear-Com Sound”, the FSII-BP19 has high audio bandwidth for superior intelligibility and listening comfort.
FreeSpeak II® 1.9 beltpacks with firmware version 5.3.32.0 upwards support Bluetooth® headsets.
TECHNICAL SPECIFICATIONS
Audio
Audio Bandwidth: 200Hz-7.5KHz
No. of Full-Duplex Audio Paths: Up to 5 with individual level control (2 dedicated rotaries, 3 with menu), 2 controls and a main volume
Mode of Operation: Full duplex on all routes
Level/Talk Controls: 4 pushbuttons, a reply button and 2 rotary controls
Enter/Answer-Back Button: 1
Bluetooth® 4.3 Headset Profile
Codec: MSBC using HFP (Hands Free Profile)
Frequency Spectrum
USA: 1920-1930 MHz
Transceiver Range Output Power: 100mW
Connectors
Headset Connector: 4-pin male, Clear-Com standard, options for 5-pin female and 7-pin male with PTT
Headset Voltage: Maximum of ~+8dBu as set by firmware
Microphone Type: Electret and Dynamic, selectable in beltpack menu
Microphone Voltage: Electret Mic:-45dBu (additional 2.5V DC bias voltage positive on Pin 2 and negative on Pin 1 via a 1k resistor).
Dynamic Mic: -55dBu
Headset Limiter: Selectable from beltpack menu
Power
Modulation: GFSK, TDMA frame 10ms Full and Long slot
Output Power: (US) 18-20dBm
Range: Typical indoor range 300ft (90m), outdoor range 800ft (240m)
Battery: Li-Ion or 3 AA alkaline cells
Battery Charging: Drop-in charger (AC60) or local USB
Battery Life: 18+ hours with Li-Ion; 9 hours with 3 x Alkaline AA cells
DETAILS
Beltpack
Functions with FreeSpeak BASE-II, FreeSpeak Edge Base, Arcadia Central Station and Eclipse HX via E-IPA cards
1.9, 2.4 and 5.0 GHz beltpacks operate on a single system
Supports up to 200 beltpacks on a single system (see Capacity Chart for details)
Encoder Volume Swap between A&C and B&D
“Listen Again” message replay
Simple 2-channel partyline operation to 5-channel intercom on the same beltpack
Over-the-air beltpack registration
Connectivity
1.9 GHz radio frequency
Typical range 300ft (90m), outdoor range 800ft (240m)
Robust radio link works in high multipath or reflective environments
FSII 1.9 beltpacks supports Bluetooth® headset connection up to version 5.1
Mechanical
IP53 rating for wet and dusty conditions
18+ hour battery life
Compatible Headsets and Mics
CC-110
Environmental
IP53 water and dust resistance
Operating: 32º-125ºF (0º-50ºC)
Storage: 32º-150ºF (0º-70ºC)
Humidity: Between 20% and 90%, Non-Condensing
Dimensions
Tapered design at largest points
3.75 x 5 x 1.5in (HxWxD)
(97 x 130 x 45mm)
Weight
9.0oz (0.4kg) including batteries